Specifications
Table Of Contents
- Manual
- Preface
- Chapter 1: Quick Start Guide
- Chapter 2: Storage Devices, Mouse, Audio & Printer
- Chapter 3: Power Management
- Chapter 4: Drivers & Utilities
- RAID & AHCI Setup
- What to Install
- Driver Installation
- Manual Driver Installation
- Updating/Reinstalling Individual Drivers
- User Account Control
- Windows Security Message
- New Hardware Found
- Driver Installation Procedure
- Chipset
- Video (VGA)
- LAN
- Card Reader
- TouchPad
- Hot Key
- USB 3.0
- MEI Driver
- Audio
- Optional Drivers
- PC Camera
- Wireless LAN
- Fingerprint Reader Module
- Bluetooth Module
- Chapter 5: BIOS Utilities
- Overview
- The Power-On Self Test (POST)
- The Setup Utility
- Main Menu
- System Time & Date (Main Menu)
- SATA Port # (Main Menu)
- System/Extended Memory (Main Menu)
- BIOS Revision/ KBC/EC firmware Revision / VGA Card etc. (Main Menu)
- Advanced Menu
- Advanced Chipset Control (Advanced Menu)
- Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
- SATA Mode (Advanced Menu)
- Power On Boot Beep (Advanced Menu)
- Battery Low Alarm Beep (Advanced Menu)
- Launch PXE OpROM (Advanced Menu)
- Security Menu
- Set Supervisor Password (Security Menu)
- Set User Password (Security Menu)
- Password on boot (Security Menu)
- Trusted Computing (Security Menu)
- TPM State (Security Menu > TPM Support Enabled)
- Pending TPM operation (Security Menu > TPM Support & TPM State Enabled)
- Boot Menu
- Boot Option Priorities (Boot Menu)
- Save & Exit Menu
- Chapter 6: Upgrading The Computer
- Chapter 7: Modules
- Chapter 8: Troubleshooting
- Appendix A: Interface (Ports & Jacks)
- Appendix B: Control Center
- Appendix C: NVIDIA Video Driver Controls
- NVIDIA Video Driver Installation
- NVIDIA Control Panel
- Display Devices
- Display Modes
- Configuring an External Display (NVIDIA)
- Attaching Other Displays (Win 7)
- SLI Multi GPU Configuration
- SLI Multi GPU Configuration & Power
- Manage 3D Settings
- Adjust Video Settings
- HDMI Audio Configuration
- HDCP Status
- NVIDIA 3D Shutter Glasses Kit
- Stereoscopic 3D Hardware Setup
- Viewing Angles
- Set Up Stereoscopic 3D
- Appendix D: Specifications
Modules
7 - 12 Intel Rapid Storage Technology
7
RAID Volume Data Verification and Repair
The RAID volume data verification process identifies any inconsistencies or bad
data on a RAID 0, RAID 1 or RAID 5 volume. The table outlines what occurs for
each RAID level:
RAID
Level
Verify Verify & Repair
RAID 0 Bad blocks are identified. N/A
RAID 5
Bad blocks are identified.
Parity is recalculated and compared
to the stored parity for that stripe.
Bad blocks are reassigned.
If the newly calculated parity does not match the
stored parity, the stored parity is overwritten with the
newly calculated parity.
RAID 1
Bad blocks are identified.
Data on the mirrored drive is
compared to data on the source
drive.
Bad blocks are reassigned.
If the data on the mirrored drive does not match the
data on the source drive, the data on the mirrored
drive is overwritten by the data on the source.
Table 7 - 2
RAID Level
Verification &
Repair Status