Specifications

Upgrading The Computer
6 - 26 Upgrading the Video Card
6
10. Carefully lift up the mylar sticker cover(s) at point (two covers are pictured).
11. Remove the mylar sticker cover(s) and only use a flat-headed screwdriver (do
not try to use any other screwdriver type here) to remove screws & .
12. Carefully remove the video card .
13. If your system includes two video cards you will need to disconnect the cable
between the master and slave cards (do not forget to reconnect the cable if you
are replacing two cards).
23

Caution
The heat sink, and video
card area in general,
contains parts which are
subject to high tempera-
tures. Allow the area
time to cool before re-
moving these parts.
Figure 6 - 29
Video Card Removal
24
25
26
27
23
23
2324 25 24 25
26 26
27