Specifications
Table Of Contents
- Manual
- Preface
- Chapter 1: Quick Start Guide
- Overview
- Model Differences
- System Startup
- System Map: LCD Panel Open - Models A & B
- System Map: LCD Panel Open - Model C
- Keyboard - Models A & C
- Keyboard LED - Models A & C
- Keyboard - Model B
- Control Center
- System Map: Front & Rear Views
- System Map: Right View
- System Map: Left View
- System Map: Bottom View - Models A & B
- System Map: Bottom View - Model C
- Windows 7 Start Menu & Control Panel
- Video Features
- Power Options
- Chapter 2: Storage Devices, Mouse, & Audio
- Chapter 3: Power Management
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Overview
- The Power-On Self Test (POST)
- The Setup Utility
- Main Menu
- Advanced Menu
- Advanced Chipset Control (Advanced Menu)
- Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
- Intel(R) Rapid Start Technology (Advanced Menu)
- SATA Mode (Advanced Menu)
- Legacy USB Support (Advanced Menu)
- Boot Logo (Advanced Menu)
- Power On Boot Beep (Advanced Menu)
- Battery Low Alarm Beep (Advanced Menu)
- Security Menu
- Boot Menu
- Exit Menu
- Chapter 6: Upgrading The Computer
- Chapter 7: Modules
- Overview
- Setting Up SATA RAID or AHCI Mode
- Intel Rapid Storage Technology
- PC Camera Module
- Wireless LAN Module
- Intel® Wireless Display Application
- Fingerprint Reader Module
- Bluetooth Module
- 3rd Party Bluetooth Combo Driver Installation Information
- 3rd Party Bluetooth Combo Driver Version 1 Installation
- 3rd Party Bluetooth & WLAN Combo Settings
- 3rd Party Bluetooth Networking Setup
- 3rd Party Bluetooth & WLAN Combo Module Configuration
- Intel Bluetooth Combo Driver Installation
- Standard Bluetooth Configuration in Windows 7
- THX TruStudio Pro Audio
- Intel® Rapid Storage Technology Driver
- Intel® Rapid Start Technology Driver
- Chapter 8: Troubleshooting
- Appendix A: Interface (Ports & Jacks)
- Appendix B: Control Center
- Appendix C: Video Driver Controls
- Appendix D: Specifications
Modules
7 - 6 Setting Up SATA RAID or AHCI Mode
7
RAID Setup (Intel Matrix)
1. As the computer starts up press Ctrl + i to enter RAID configuration menu.
2. Select 1.Create RAID Volume and press Enter.
3. Type the RAID volume name and then press Tab or Enter to advance to the next
field.
4. Specify (use the up and down arrow keys) the RAID level (RAID 0, RAID 1 or
Recovery - see Table 7 - 1, on page 7 - 3) and then press Tab or Enter to
advance to the next field.
Figure 7 - 1
Intel(R) Rapid
Storage Technology
Option ROM
Recovery Level
When selecting disks for
the Recovery RAID level
you will need to use the
Tab key to select a Mas-
ter disk, and the Space
key to select a Recov-
ery disk.
You can select the syn-
chronization between
the disks to be Continu-
ous (automatic) or On
Request (manually).