Specifications
Table Of Contents
- Manual
- Preface
- Chapter 1: Quick Start Guide
- Overview
- Model Differences
- System Startup
- System Map: LCD Panel Open - Models A & B
- System Map: LCD Panel Open - Model C
- Keyboard - Models A & C
- Keyboard LED - Models A & C
- Keyboard - Model B
- Control Center
- System Map: Front & Rear Views
- System Map: Right View
- System Map: Left View
- System Map: Bottom View - Models A & B
- System Map: Bottom View - Model C
- Windows 7 Start Menu & Control Panel
- Video Features
- Power Options
- Chapter 2: Storage Devices, Mouse, & Audio
- Chapter 3: Power Management
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Overview
- The Power-On Self Test (POST)
- The Setup Utility
- Main Menu
- Advanced Menu
- Advanced Chipset Control (Advanced Menu)
- Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
- Intel(R) Rapid Start Technology (Advanced Menu)
- SATA Mode (Advanced Menu)
- Legacy USB Support (Advanced Menu)
- Boot Logo (Advanced Menu)
- Power On Boot Beep (Advanced Menu)
- Battery Low Alarm Beep (Advanced Menu)
- Security Menu
- Boot Menu
- Exit Menu
- Chapter 6: Upgrading The Computer
- Chapter 7: Modules
- Overview
- Setting Up SATA RAID or AHCI Mode
- Intel Rapid Storage Technology
- PC Camera Module
- Wireless LAN Module
- Intel® Wireless Display Application
- Fingerprint Reader Module
- Bluetooth Module
- 3rd Party Bluetooth Combo Driver Installation Information
- 3rd Party Bluetooth Combo Driver Version 1 Installation
- 3rd Party Bluetooth & WLAN Combo Settings
- 3rd Party Bluetooth Networking Setup
- 3rd Party Bluetooth & WLAN Combo Module Configuration
- Intel Bluetooth Combo Driver Installation
- Standard Bluetooth Configuration in Windows 7
- THX TruStudio Pro Audio
- Intel® Rapid Storage Technology Driver
- Intel® Rapid Start Technology Driver
- Chapter 8: Troubleshooting
- Appendix A: Interface (Ports & Jacks)
- Appendix B: Control Center
- Appendix C: Video Driver Controls
- Appendix D: Specifications
Upgrading The Computer
Upgrading the Hard Disk Drive(s) 6 - 11
6
Removing the Hard Disk from the Secondary HDD Bay (Model C)
Note that the secondary hard disk (Model C if installed) is located under the optical
device bay (CD/DVD).
1. Turn the computer off, remove the AC/DC adapter, turn it over and remove the bat-
tery.
2. Remove the optical device (see “Upgrading the Optical Device (Model C)” on
page 6 - 5)
3. When the optical device is removed the secondary HDD assembly will be visible.
4. Remove screws - from the secondary HDD assembly.
RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 8
Secondary HDD
Assembly Screws
1
3
3
1 2