Specifications
Table Of Contents
- Manual
- Preface
- Chapter 1: Quick Start Guide
- Overview
- Model Differences
- System Startup
- System Map: LCD Panel Open - Models A & B
- System Map: LCD Panel Open - Model C
- Keyboard - Models A & C
- Keyboard LED - Models A & C
- Keyboard - Model B
- Control Center
- System Map: Front & Rear Views
- System Map: Right View
- System Map: Left View
- System Map: Bottom View - Models A & B
- System Map: Bottom View - Model C
- Windows 7 Start Menu & Control Panel
- Video Features
- Power Options
- Chapter 2: Storage Devices, Mouse, & Audio
- Chapter 3: Power Management
- Chapter 4: Drivers & Utilities
- Chapter 5: BIOS Utilities
- Overview
- The Power-On Self Test (POST)
- The Setup Utility
- Main Menu
- Advanced Menu
- Advanced Chipset Control (Advanced Menu)
- Bluetooth Power Setting (Advanced Menu > Advanced Chipset Control)
- Intel(R) Rapid Start Technology (Advanced Menu)
- SATA Mode (Advanced Menu)
- Legacy USB Support (Advanced Menu)
- Boot Logo (Advanced Menu)
- Power On Boot Beep (Advanced Menu)
- Battery Low Alarm Beep (Advanced Menu)
- Security Menu
- Boot Menu
- Exit Menu
- Chapter 6: Upgrading The Computer
- Chapter 7: Modules
- Overview
- Setting Up SATA RAID or AHCI Mode
- Intel Rapid Storage Technology
- PC Camera Module
- Wireless LAN Module
- Intel® Wireless Display Application
- Fingerprint Reader Module
- Bluetooth Module
- 3rd Party Bluetooth Combo Driver Installation Information
- 3rd Party Bluetooth Combo Driver Version 1 Installation
- 3rd Party Bluetooth & WLAN Combo Settings
- 3rd Party Bluetooth Networking Setup
- 3rd Party Bluetooth & WLAN Combo Module Configuration
- Intel Bluetooth Combo Driver Installation
- Standard Bluetooth Configuration in Windows 7
- THX TruStudio Pro Audio
- Intel® Rapid Storage Technology Driver
- Intel® Rapid Start Technology Driver
- Chapter 8: Troubleshooting
- Appendix A: Interface (Ports & Jacks)
- Appendix B: Control Center
- Appendix C: Video Driver Controls
- Appendix D: Specifications
Upgrading The Computer
Upgrading the Optical Device (Model C) 6 - 5
6
Upgrading the Optical Device (Model C)
1. Locate the secondary hard disk bay cover and remove screws & .
2. Remove the hard disk bay cover.
3. Remove the screw at point , and use a screwdriver to carefully push out the
optical device out of the bay.
4. Reverse the process to install any new optical (CD/DVD) device.
Figure 6 - 3
Removing the
Optical (CD/DVD)
Device
1
2
3
1
2
3