Service manual

Disassembly
Removing the Processor 2 - 9
2.Disassembly
Removing the Processor
1. Turn off the computer, remove the battery (page 2 - 5).
2. Remove screws - from the memory socket cover
.
3. Carefully lift up the memory socket cover (a fan cable is still attached to the mainboard and you can discon-
nect it).
4. Remove screws
- (Figure 5c) from the heat sink, in the order indicated on the label.
5. Carefully lift up the heat sink (Figure 5d) off the computer.
1 8
9
10
11 14
15
Figure 5
Processor Removal
a. Remove the screws.
b. Carefully lift the cover off
the computer.
c. Remove the screws in
the order indicated.
d. Remove the heat sink.

Reassembly Screw
Order
When replacing the
heat sink, make sure
you insert the screws
in the same order indi-
cated on the label.

15. Heat Sink
•12 Screws
a.
13
14
15
12
b.
c. d.
1
2
3
4
56
87
9
10
11