Service manual

Disassembly
2 - 8 Removing the CD/DVD Device (Bay Two)
2.Disassembly
Removing the CD/DVD Device (Bay Two)
The easy changeable CD device may be upgraded or changed.
1. Turn off the computer, remove the battery (page 2 - 5).
2. Remove screws - (Figure 4a) from the memory socket cover
.
3. Carefully lift up the memory socket cover (a fan cable is still attached to the mainboard and you can either
disconnect it or leave it attached).
4. Use a screwdriver to carefully push the CD/DVD device assembly out of the computer at point .
5. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
screw holes should line up.
6. Replace the memory socket cover (be careful with the fan cable) and the 8 screws (page 2 - 8).
7. Restart the computer to allow it to automatically detect the new device.
1 8
9
10
10
11
10
12
Figure 4
CD Device Removal
a. Remove the screws.
b. Carefully lift the socket
cover and slide the CD/
DVD device out of the
computer.
1
2
3
4
56
87
12
a. b.
10
11
9

11. CD/DVD Device
•8 Screws