Service manual

1
System specifications
The 5100S/5500S uses the SiS630S core logic and InSyde BIOS code. This product also
features three bays for user-installed modules (a HDD, a CD-ROM or DVD-ROM or a FDD),
and has an optional Fax/Modem MDC module.
The main unit of the Model 5100S/5500S Notebook PC has the following components:
– Intel Mobile Pentium III with AGP technology-based mainboard, using the SiS630S
chipset solution supporting SDRAM with 0 MB on-board DRAM, expandable to
32MB, 64MB, 96MB, 128MB, 192MB, 256MB, or 512MB using one or two expansion
S.O. DIMMs
– user-installed modules: CD-ROM, DVD-ROM and an FDD
– main storage (HDD) bay: principal HDD, 2.5” up to 12GB(Ultra DMA33/66)
– User interfaces:
· one internal keyboard, 84 keys (depending on the language)
· one built-in trackpad
· one 800x600 SVGA TFT 12.1” LCD display panel with CCFT backlight
– Power Solutions
· power bay: battery pack
· AC/DC adapter
CPU ( µPGA2)
Intel Celeron-450 (1.6V)
Intel Celeron-500 (1.6V)
Intel Celeron-550 (1.6V)
Intel Celeron-700 (1.6V)
Intel Pentium III-600 * (1.6V)
Intel Pentium III-650 * (1.6V)
Intel Pentium III-700 * (1.6V)
Intel Pentium III-750 * (1.6V)
Intel Pentium III-850 * (1.6V)
* with Intel SpeedStep Technology
HDD
Removable module up to 12GB
Drive size 2.5"
Height maximum 12.7mm
Average access time <13ms
Interface: PCI local bus master
IDE with Ultra DMA33/66 I/F
FDD
removable 3.5" 1.44MB
BIOS
InSyde 256KB
CD-ROM (MKE CR175) 24X remov-
able module
CD type 12.8cm
Height 12.7mm
Data transfer rate 3600KB/s (max)
Random access time <100ms
Compliance Multimedia PC-2 Spec.
Transport drawer type load/eject
Interface PCI local bus master IDE
Memory
L2 Cache (on die)
Celeron(.18) series 128KB
Pentium III series 256KB
On board RAM 0MB
Upgradable to 512MB (MAX.)