Service manual

19
Removing a Memory Module
1) Turn off the computer.
2) Press the two keyboard latches to elevate the keyboard from its normal position
(refer to Figure 4-1)
3) Carefully lift the keyboard assembly out to expose the mainboard.
4) Locate the memory sockets. Bank 0 is on the left and Bank 1 is on the right. (refer
to Figure 4-2)
5) Gently pull the two latches outward on both ends of the module
.
6) The module will pop up
.
7) Remove the memory module
.
8) Install a new memory module if desired (refer to Installing a Memory Module).
9) Put the keyboard back into place.