Service manual

18
Note: Make sure the connectors go into the bank. You must use a RAM module that com-
plies with Intel unbuffered SODIMM (67.6 mm x 29.0 mm). Please consult your dealer for
the details.
connectors
29.0 mm
67.6 mm
Changing the S3 DIP Switch settings
Once you have installed the new memory you will have to change the DIP Switch set-
tings depending on the type of memory you have installed. Please refer to the chart
below for the correct settings for the S3 DIP Switches
SDRAM
TYPE
S3-1 S3-2 S3-3 S3-4
PC100 ON OFF OFF OFF
PC133 ON OFF ON OFF
S3 DIP Switch
ON position
OFF position