Service manual

17
5) Insert the memory module at an angle (about 45°)
and fit its connectors firmly into the bank
.
6) Press down the edge of the memory module and lock
it into place
.
7) Put the keyboard back into place.
Note: Only use Bank 0 if you have one memory module. If you are using two memory mod-
ules always use the larger module in Bank 0.
Installing a Memory Module
1) Turn off the computer.
2) Press the two keyboard latches at the top of the
keyboard to elevate the keyboard from its normal
position.
3) Carefully lift the keyboard assembly out to expose
the mainboard.
4) Locate the memory banks, Bank 0 is on the
right and Bank 1 is on the left.
Figure 4-1
Bank 1 Bank 0
Figure 4-2