Service manual

heat sink cable

heat sink screws

Heat sink

Adding or replacing the processor.

Note: If you plan on removing the heat sink, which is necessary to add or replace the

processor, you will need to have a replacement heat sink pad available. Before proceed-

ing, please contact your dealer to get a replacement pad which you will need when you

reinstall the heat sink.

In order to add or replace the processor you must:

A: Remove the heat sink

B: Remove the processor

C: Insert a new processor

D: Reinstall the heat sink

E: Changing the SW DIP Switch settings

A: Remove the heat sink

1) Turn off the computer

2) Turn over the computer

3) Remove the Heat Sink and CPU Cover

4) Remove the 4 screws which hold the

heat sink in place.

5) Gently remove the heat sink cable.

6) Lift the heat sink out of the computer

Figure 4-3