Service manual

8
PC Card Chipset
The PCI1410 supports the following features:
- Ability to wake from D3 hot and D3 cold
- Fully compatible with the IntelE 430TX (Mobile Triton II) chipset
- A 144-Pin Low-Profile QFP (PGE), 144-ball MicroStar Ball Grid Array (GGU)
package, or 209-ball MicroStar Ball Grid Array (GHK) package
- 3.3-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI
signaling environments
- Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards
- Single PC Card or CardBus slot with hot insertion and removal
- Burst transfers to maximize data throughput on the PCI bus and the CardBus bus
- Parallel PCI interrupts, parallel ISA IRQ and parallel PCI interrupts, serial ISA
IRQ with parallel PCI interrupts, and serial ISA IRQ and PCI interrupts
- Serial EEPROM interface for loading subsystem ID and subsystem vendor ID
- Pipelined architecture allows greater than 130M bps sustained throughput from
CardBus-to-PCI and from PCI-to-CardBus
- Interface to parallel single-slot PC Card power interface switches like the TI
TPS2211
- Up to five general-purpose I/Os
- Programmable output select for CLKRUN
- Five PCI memory windows and two I/O windows available to the 16-bit PC Card
socket
- Two I/O windows and two memory windows available to the CardBus socket
- Exchangeable Card Architecture (ExCA) compatible registers are mapped in
memory and I/O space
- Intel 82365SL-DF and 82365SL register compatible
- Distributed DMA (DDMA) and PC/PCI DMA
- 16-Bit DMA on the PC Card socket
- Ring indicate, SUSPEND, PCI CLKRUN, and CardBus CCLKRUN
- Socket activity LED pins
- PCI Bus Lock (LOCK)
- Advanced Submicron, Low-Power CMOS Technology
- Internal Ring Oscillator