Service manual
Table Of Contents
- Manual
- Preface
- 1: Introduction
- Overview
- System Specifications
- External Locator - Top View with LCD Panel Open
- External Locator - Front & Left Side Views
- External Locator - Right Side & Rear Views
- External Locator - Bottom View
- Mainboard Overview - Top (Key Parts)
- Mainboard Overview - Bottom (Key Parts)
- Mainboard Overview - Top (Connectors)
- Mainboard Overview - Bottom (Connectors)
- 2: Disassembly
- Overview
- Maintenance Tools
- Connections
- Maintenance Precautions
- Disassembly Steps
- Removing the Battery
- Removing the Hard Disk Drive
- Removing the Modem
- Removing the Wireless LAN
- Removing the System Memory (RAM)
- Removing the Optical (CD/DVD) Device
- Removing the Processor
- Removing the Keyboard
- Appendix A: Part Lists
- Appendix B: Schematic Diagrams
- System Block Diagram
- Socket 479 - 1 of 2
- Socket 479 - 2 of 2
- 855PM MCH-1
- 855PM MCH-2
- 855PM MCH-3
- DDRAM
- DDR Termination
- Clock Generator
- ICH4-1 (1 of 3)
- ICH4-2 (2 of 3)
- ICH4-3 (3 of 3)
- USB 2.0
- MDC, BT, CCD, Mini PCI
- HDD, CDROM
- LAN RTL8110S (B)-32
- LPC S I/O, Flash ROM
- Power On Checklist
- Hitachi H8S
- Audio Codec ALC202
- PCMCIA (PCI1620)
- PCMCIA Socket
- TI1394 (TSB43AB21)
- M10 AGP/PCI/Power
- M10 MEM I/F-A
- M10 MEM I/F-B
- M10 VGA Connector
- Panel CON
- VGA DDR DRAM Termination
- Audio Out & Off Board
- BTVCC, +1.5V, +1.8VS
- V_CORE
- +VDD3, +VDD5, +12V, +3V, +5V
- +2.5VS, +1.25VS, +5VS, +3VS
- Charger
- SMSC LPC47N217 LPC I/F
Disassembly
2 - 8 Removing the Modem
2.Disassembly
Removing the Modem
1. Turn off the computer, remove the battery (page 2 - 5) and the HDD bay cover (page 2 - 6).
2. Remove screws - (Figure 4a), carefully separate the modem from the connector and disconnect cables
- .
3. Lift the modem
(Figure 4b) up and off the computer.
Figure 4
Modem Removal
a. Remove the screws and
disconnect the cable and
connector.
b. Remove the module.
1 2
3
4 5
6
a. b.
6
4
3
1
2
c.
5
5. Modem
.
•2 Screws