User manual

2.3. Copying SMS to your memory card (Independence/Modchip)
http://sksapps.com/sms/en/installation-copytomemcard.html[2011/09/27 09:53:37]
Figure 2.12. uLaunchELF: Starting the FTP server
You can check that the connection between the PC and PS2 is working by starting a command prompt on the PC (start->run, 'cmd' <enter>). Then
type ping 192.168.0.10 (or whatever the IP address of your PS2 is). If it's working, you'll see reply from ... shown on the screen.
Now that you've got your FTP server running, skip ahead to Section 2.3.1.3,
Starting the FTP Client for how to upload SMS to your memcard.
2.3.1.2. Starting the FTP Server (ExecFTPs)
If you are not using uLaunchELF
, you'll need to load a seperate FTP server application onto your memory card such as EXECFTPS.ELF. Activate
your exploit, and boot to your boot browser (e.g. LaunchELF). You can either configure one of the buttons to start EXECFTPS.ELF directly, or
navigate to it using the filebrowser, then run it from there.
Figure 2.13. Start ExecFTPs by navigating to the ELF using LaunchELF.
Figure 2.14. Starting ExecFTPs using a configured button (the configuration above shows that by pressing start on
controller 1, ExecFTPs will be started).
Either way, once you've got the FTP server running, you should see your TV screen show something like this:
Figure 2.15. Screenshot of ExecFTPs running using default IP configuration.