Specifications

Upgrading The Computer

6 - 10 Upgrading the Hard Disk Drive(s)

Removing the Hard Disk from the Secondary HDD Bay

1. Turn off the computer, and turn it over and remove the battery and component bay

cover (see pages 6 - 4 & 6 - 5).

2. Remove screws & from the secondary HDD assembly.

3. Slide the HDD assembly in the direction of arrow

4. Lift the HDD assembly out of the computer .



HDD Insulation Plates

Note that the HDD insu-

lation plates for the pri-

mary and secondary

hard disks, though simi-

lar in outward appear-

ance, are NOT

interchangeable. The

plates are clearly

marked 1ST HDD & 2nd

HDD.

Make sure you use the

appropriate insulation

plate for the HDD as the

sizes are slightly differ-

ent

Figure 6 - 6

Secondary HDD

Assembly Screws &

Removal