Service manual

Disassembly
2 - 6 Removing the Optical (CD/DVD) Device
2.Disassembly
Removing the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Locate the hard disk bay cover and remove screws & , and remove the bay cover .
3. Remove screw .
4. Use the screwdriver to push the optical device out of the computer at point .
5. Reverse the process to install the new device.
Figure 2
Optical Device
Removal
a. Remove the screws.
b. Remove the cover.
c. Remove the screw and
push the optical device
out of the computer at
point 5.
1
2
3
4
6
5

3. Hard Disk Bay Cover
6. Optical Device
•3 Screws
1
2
4
a. b.
5
6
c.
3
5

Blu-Ray Device Bezel Removal
Note that some Blu-Ray modules (e.g. Pio-
neer) have a small piece of mylar inserted in
the left side (as viewed front on) of the bezel
cover; in order to prevent the bezel cover of
the module from being removed accidentally.
If you need to replace the bezel cover, you will
need to use a screwdriver to ease out and re-
move the mylar before attempting to remove
the bezel cover. You will need to re-insert the
mylar when replacing the bezel cover.