Service manual

Disassembly
Removing the Modem Module 2 - 19
2.Disassembly
3. Turn the computer over and remove screws - from the bottom case.
4. Carefully remove the top case assembly from the bottom case assembly (carefully feed the wireless and
Bluetooth cables through the hole in the mainboard when separating the case assemblies).
5. Carefully disconnect cables - , and remove screw .
7 19
Figure 15
Modem Module
Removal (cont’d)
b. Remove the screws from
the bottom case.
c. Carefully separate the
top and bottom case as-
semblies.
d. Disconnect the cables
and remove the screw.

PC Card/4-in-1 Card
Reader Warning
Make sure there are no
covers or cards in the
PCMCIA Card Reader
or 4-in-1 card reader
before separating the
case assemblies.
20 21
7
9
8
16
171819
10
11
12
13
14
15
21
20
b. d.
c.
22
23
24
25
26
Carefully feed the WLAN and Bluetooth cables through
this hole when separating the top and bottom case asssemblies.
.
22 25 26

20. Top Case Assembly
21. Bottom Case
Assembly