Service manual

Disassembly
2 - 6 Removing the Hard Disk Drive
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" or 1.8" Parallel (PATA) hard disks with a height of
9.5mm (h) (see “Storage” on page 1 - 2).
1. Turn off the computer, and turn it over and remove the battery (page 2 - 5).
2. Locate the hard disk bay cover and remove the screws from points - .
3. Remove the hard disk bay cover (and foam top cover for 1.8" hard disks).
Figure 2
HDD Assembly
Removal
a. Remove the screws.
b. Remove the cover.
c. Remove the foam top
cover for 1.8" hard disks.

4. HDD Bay Cover
5. Top Sponge Module
for 1.8" Hard Disks
•3 Screws
1 3
1
3
2
a.
4 5
b. b.c.
4 45