Service manual

Disassembly

2 - 20 Removing and Installing the Processor

2.Disassembly

Removing and Installing the Processor

Processor Removal Procedure

1. Turn off the computer, remove the battery (page 2 - 5), component bay cover (page 2 - 10), fans (page 2 - 17) and

video card heatsink (page 2 - 17).

2. Remove screws - from the heat sink unit in the order indicated on the label (i.e screw 4 first through to screw

1 last) (Figure 16a

3. Carefully (it may be hot) remove the heat sink unit by pulling the label up (Figure 16b).)

Figure 16

Processor

Removal

Procedure

a. Remove the screws

in the reverse order.

b. Carefully remove

the heat sink unit by

pulling the label up.



CPU Warning

In order to prevent

damaging the contact

pins when removing

the CPU, it is neces-

sary to first remove the

WLAN module from

the computer.



5. Heat Sink Unit

•4 Screws

Note: Loosen the screws in the reverse order

4-3-2-1 as indicated on the label.