Service manual

Disassembly
2 - 16 CPU/Video Card Pre-Installation Procedure
2.Disassembly
7. Insert the video card into the video card socket and tighten screws & (Figure 12f). For more
information, see
page 2 - 19.
8.
Remove the stickers from the back of the thermal pads and insert the video card heat sink (Figure 12g)
9. Tighten screws - as indicated on the label (Figure 12h).
10. Insert the video card & CPU fans & (Figure 12i).
11. Connect cables
& , and tighten screws - (Figure 12j). Replace the component bay cover (page 2
- 10).
E
11
12
F
Figure 12
CPU/Video Card
Pre-Installation
Procedure (cont’d)
f. Insert the video card
into the video card
socket and tighten the
screws.
g. Remove the back stic-
kers of the thermal pad
and insert the video
card heat sink.
h. Tighten the screws as
indicated on the label.
i. Insert the video card
and CPU fans.
j. Connect the cables and
tighten the screws.

E. Video Card
F. Video Card Heat Sink
G. Video Card Fan
H. CPU Fan
•14 Screws
13
18
G
H
19
20
21
26
f.
g.
h.
i.
17
18
Screw 1
Screw 2Screw 3
Screw 4
Screw 5 Screw 6
F
Thermal
Video Card Socket
j.
21
G H
22
23
24
25
26
19
20
13
14
12
15
16
11
Pad
E