Service manual

Disassembly
Removing the VGA Card(s) 2 - 11
2.Disassembly
Removing the VGA Card(s)
1. Turn off the computer, and turn it over, remove the battery ( page 2 - 5 ) and remove the component bay cover ( page 2 - 8 ).
2. The VGA Card(s) will be visible at point on the mainboard.
3. Remove screws
- (Figure b).
4. Carefully (a cable is still connected) grip the plastic tag and lift the video card up off the sockets - and
disconnect cable .
5. Reverse the process to install the new VGA Card.
Figure 7
VGA Card(s)
Removal
a. Locate the heat sink.
b. Remove the screws.
c. Lift the VGA card up off
the sockets and discon-
nect the cable.

10. VGA Card(s)
•4 Screws
1
2 5
10
6 8
9
a.
6
b.
c.
2
3
1
5
4
2
3
5
4
8
7
6
7
8
10
10
99
99
99