Service manual

Disassembly
2 - 10 Removing the Processor
2.Disassembly
5. Turn the release latch towards the unlock symbol , to release the CPU.
6. Carefully (it may be hot) lift the CPU up out of the socket (Figure e).
7. Reverse the process to install a new CPU (don’t forget to lock the CPU down ).
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
10
11
12
Figure 6
Processor Removal
(cont’d)
d. Unlock the release latch.
e. Remove the CPU.
f. Replace the CPU and
lock the release latch.
d.
e.
Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
10
11
f.
12
11. CPU