Service manual

Disassembly
2 - 14 Removing the Bluetooth Module
2.Disassembly
Removing the Bluetooth Module
1. Turn off the computer, and turn it over, remove the battery (page 2 - 5).
1. The Bluetooth module bay cover is located under the battery.
2. Remove screws and from the bay cover.
3. Remove the bay cover
.
4. Remove screw then disconnect the cable and carefully separate the Bluetooth Module from the connector
(Figure d).
5. Lift the Bluetooth Module (Figure e) up and off the computer.
Figure 10
Bluetooth Module
Removal
a. Remove the battery and
locate the Bluetooth
module bay cover.
b. Remove the screws.
c. Remove the cover.
d. Disconnect the cable
and the connector from
the bluetooth module.
e. Lift the Bluetooth module
out.
1
2 3
4
5 6
7
8
d.
b.
a.
3
2
1
5
6
8
7
e.
c.
4

4. Bluetooth Module Bay
Cover
8. Bluetooth Module
•3 Screws