Service manual

2 – 192 – 19

2 – 19

DISASSEMBLY

LED + INVERTER BOARD REMOVAL

Part A

Remove the Back Cover (page 2-4).

Remove the Modem Module (page 2-8).

Remove the I/O Bracket (page 2-13).

Perform Steps 1, 2 & 3 of Part B of the LCD Module Removal Procedure (page 2-16).

Part B

1. Separate the Front Panel from the rest of the system by removing 4 screws (A, B, C & D).

2. Separate the LED + Inverter Board from the Front Panel by removing 3 screws (E, F & G).

REMOVING THE LED +

INVERTER BOARD

FIG. 2-18

LED + Inverter Board Removal

Front Panel

LED + Inverter Board