Service manual

2 – 18
2
SERVICE MANUAL
4. Remove the LCD Module.
A. Remove 4 screws (A, B, C & D) to separate the Front Panel from the rest of the system.
At this point the LCD Module is still connected to the System Board at a board-to-board connector and to the Converter Board.
B. Remove the LCD Module by disconnecting it from Connector CN33 on the reverse side of the System Board and disconnecting the Converter
Cable.
LCD Module Removal
A
B
C
D
Front Panel
LCD Module
Connector
CN33
LCD
Connector
REMOVING THE LCD
MODULE
FIG. 2-17
Converter
Cable