Service manual

2 – 52 – 5

2 – 5

DISASSEMBLY

CPU Removal

CPU REMOVAL

Part A

Remove the Back Cover (page 2-4).

Part B

)Note: If you want to upgrade the CPU, replace the old CPU with the upgraded one and also see the CPU Upgrade

Notes on the next page.

1. Unplug the Fan Cable from Connector CN10.

2. Disengage both caches at the sides of the Fan from the CPU socket.

3. A thermal pad is attached to the Fan. Remove the Fan with the Thermal Pad from the CPU.

4. Disengage the CPU lever and remove the CPU.

REMOVING THE FAN

AND

THE CPU

FIG. 2-3

)Note for Replacing the CPU: : Reverse the removal procedure. Please also note the following:

When inserting the CPU, put the CPU in the CPU socket with the notched corner of the CPU aligning with the notched corner

of the CPU socket and then engage the lever.

Fan

CPU

CN10