Hardware manual

WARNING !
This equipment generates and can radiate radio frequencies. If not installed in accordance with the instruction manual, it may
cause interference to radio communications. The equipment has not been tested for compliance with the limits for class A
computing devices, pursuant to subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against
such interference, but temporary usage is permitted as per regulations. Operation of this equipment in a residential area is
likely to cause interference, in which case the user, at his own expense is required to take whatever measures may be required
to shield the interference.
DISCLAIMER!
The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. ELTEC reserves the right to make changes to any products to improve reliability, function or
design. ELTEC does not assume any liability arising out of the application or use of any product or circuit described in this
manual; neither does it convey any license under its patent rights nor the rights of others. ELTEC products are not authorized
for use as components in life support devices or systems intended for surgical implant into the body or intended to support or
sustain life. Buyer agrees to notify ELTEC of any such intended end use whereupon ELTEC shall determine availability and
suitability of its product or products for the use intended.
ELTEC points out that there is no legal obligation to document internal relationships between any functional modules, realized
in either hardware or software, of a delivered entity.
This document contains copyrighted information. All rights including those of translation, reprint, broadcasting,
photomechanical or similar reproduction and storage or processing in computer systems, in whole or in part, are reserved.
EUROCOM is a trademark of ELTEC Elektronik AG. Other brands and their products are trademarks of their respective
holders and should be noted as such.
© 1995 ELTEC Elektronik AG, Mainz
Rev. Changes Date
Rev. Changes Date
Revision History EUROCOM-27
ELTEC Elektronik AG
Galileo-Galilei-Str. 11 Postfach 42 13 63
D-55129 Mainz D-55071 Mainz
Telephone [phone]
Telefax [phone]
1 A First Edition
valid for EUROCOM-27 Hardware Revision 1.A 31.01.95, T.K.