Manual

Upgrading The Computer
5 - 10 Upgrading the Optical Device (Model B)
5
Upgrading the Optical Device (Model B)
1. Unplug the power cord and disconnect all peripheral cables (including the phone
line) from the computer.
2. Locate the optical device eject switch and remove screw .
3. Push the optical device eject switch to slide the optical device assembly out of
the bay.
4. Remove the optical device, and reverse the removal procedures to install the new
optical device.
Figure 5 - 11
Model B
Optical Device
Removal
1
2
1
2