Service manual

Disassembly

2 - 12 Removing the Floppy Disk Drive Assembly

2.Disassembly

Removing the Floppy Disk Drive Assembly

1. Remove the LCD back cover (page 2 - 6).

2. Remove screws - from the floppy disk drive assembly.

3. Carefully disconnect the floppy disk drive ribbon cable at point .

4. Lift the floppy disk drive assembly off the mainboard.

Figure 2 - 8

Floppy Disk Drive

Assembly

Removal

Sequence

a. Remove the screws

from the FDD assem-

bly and disconnect the

FDD ribbon cable.

b. Lift the FDD assembly

off the board.

1 4



6. FDD Assembly

•4 Screws