Service manual

Disassembly
Removing the Modem 2 - 11
2.Disassembly
Removing the Modem
1. Remove the LCD back cover (page 2 - 6) and I/O bracket (page 2 - 10).
2. Remove screws and from the modem module and disconnect the modem cable at point .
3. Disconnect the modem module from the connector socket , and lift it and the modem and cable off the
mainboard.
Figure 2 - 7
Modem Removal
Sequence
a. Remove the screws
from the modem unit,
and disconnect the
cable.
b. Lift the modem and
cable off the board.

4. Modem module
6. Modem cable
•2 Screws
1 2 3
4
5
6
1
3
5
a. b.
2
4
6