Service manual

Disassembly
2 - 8 Removing the CPU
2.Disassembly
Removing the CPU
1. Remove the LCD back cover (page 2 - 6).
2. Press down and hold each of the latches & (on the top of the CPU heat sink and fan unit) in turn.
3. With the latch held down you will be able to release the brackets (at points & ), and then ease the brackets
off the fan unit.
4. Release the power cable from the board and lift out the CPU heat sink fan unit .
Figure 2 - 4
CPU Removal
Sequence
a. Release the latches
from the top of the
CPU heat sink and fan
unit.
b. Remove the latches.
c. Release the power ca-
ble.
d. Lift the heat sink & fan
unit out.
1 2
3 4
5
6
7
2
6
1
c.
a.
b.
4 3
5
d.
5
7

5. Brackets
7. Heat Sink & Fan

Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high
temperatures - Please
allow the area time to
cool before removing
these parts.