Specifications

2-36 User’s Manual
Attaching a TV Set
The S-video jack on the rear panel of the DeskNote is used for transmitting
video signals to a TV set. You may select the video standard for video display.
Enter the System Configuration Utility (SCU), Components Menu to specify
the appropriate TV mode. Simultaneous display on external monitor (CRT)
and TV is available. You may enter the SCU to select the appropriate
parameters or use the Fn + F6 keys (refer to Chapter 2, Using Hot Keys) to
change the setting.
See figure 2-32 for information on attaching a TV set.
Note: Different countries use different TV broadcast standards. A TV set
must comply with the appropriate standard to properly receive the
broadcast signals. You should refer to your TV user guide to make sure
which TV standard you are using.
Figure 2-30