Specifications

2-12 User’s Manual
Using the Hard Disk Drive
The DeskNote is equipped with a 2.5” IDE hard disk drive mounted in a
removable case. Therefore, the hard disk drive can also be easily removed
and replaced with another hard disk drive with a height of 17mm. The hard
disk drive supports Programmed I/O (PIO) mode 4, Master mode and Ultra
ATA (Ultra DMA-33) mode which can provide a high performance data transfer
rate at speeds up to 33 MB/second.
Removing the Hard Disk Drive Module
1. Turn off the power.
2. Turn the DeskNote over.
3. Locate the Hard Disk drive latch (Figure 2-11).
4. Push the latch in the direction as indicated and pull the hard disk drive
module out of the bay.
Figure 2-11