Specifications

Chapter 3—BIOS Utilities 2-7
Setting the DIP Switch
Updating the Flash ROM BIOS
In order to keep up with the latest system BIOS, your DeskNote may be
upgraded. Consult your dealer for further information. The DIPSwitch needs to
be set in the On position when updating the existing system BIOS. The
DIPSwitch should be reset to the Off position after BIOS updating is complete.
DIP Switch (SW1) Purpose
S1-1 S1-2 S1-3 S1-4 S1-5 S1-6 S1-7 S1-8 Flash ROM BIOS
OFF OFF X X X X X X Existing BIOS
ON ON X X X X X X Update BIOS
Accessing the 8-Pole DIP Switch (SW1)
Access the 8-Pole DIPSwitch to set the BIOS.
1. Turn the system power off.
2. Press the two keyboard latches and carefully lift the keyboard assembly
out to expose the mainboard. Adjust the DIPSwitch SW1 to set the
configuration.
Figure 2-5
Figure 2-6