Specifications

4-22 User’s Manual
Step 3: Installing VGA Driver
m From the driver disk, find out the file and open, “Ati_vga”.
m Click “vga_win9x”, “523c47j” and choose “Disk1”.
m Click “Setup”, “Finish” and “Ok” to install the first disk.
m Next copy the file from the Disk2 so you have to change the directory
from Disk1 to Disk2 (\vga_win9x\523c47j\disk2) and click “Ok”.
m Restart the computer and click yes.
m Thus, the installation has finished.
m After restarting, check the VGA resolution.
m Click “My computer”Õ“Control Panel”Õ“Display”Õ“Settings”.
Change the resolution from 640 to 1024 by 768 pixels.(recommended)
Step 4: Installing PCMCIA Driver
m Copy the PCMCIA file to the hardisk drive c:\WINDOWS/inf/. Click
“Yes” to update “Pcmcia.w98” and restart.
m Under Windows98, open “My Computer”Õ”Control Panel” Õ”System
Properties”Õ”Device Manager”
m Click PCMCIA Socket. Click “Remove” and “Ok” and delete the two
sub-directories “Generic CardBus Controller”. Click “Ok” and restart
the computer.
m After restarting, the system will automatically detect “New Hardware
Found”. Double click “Next”/No and click “Finish”.
m Replace the Windows 98 CD-ROM drive; specify the location of
windows program and restart.