Service manual

Disassembly

2 - 16 Removing the Wireless LAN

2.Disassembly

Removing the Wireless LAN

1. Remove the keyboard (see page 2 - 11) and shielding plate (see page 2 - 12).

2. Gently pull latches & in the direction of the arrows (Figure 2 - 11) and the module will pop-up.

3. For computers with standard modem., disconnect the two antenna cables & (shorter cable “MAIN/ J1” socket

and longer cable “AUX/ J2” socket) and carefully remove the wireless LAN module .

4. For computers with Bluetooth modem combo, reverse the installation procedure of the wireless LAN (see “Install-

ing the 802.11b Wireless LAN” on page C - 3 or “Installing the 802.11g Wireless LAN” on page C - 4).

Figure 2 - 11

Wireless LAN

Module Removal

Sequence

Pull the latches, lift

the module off the

mainboard, and dis-

connect the cables.

1 2

3 4



5. Wireless LAN

module