Service manual

Disassembly

Removing the Modem 2 - 15

2.Disassembly

Removing the Modem

1. Remove the keyboard (see page 2 - 11) and shielding plate (see page 2 - 12).

2. Remove screws - and carefully lift the modem up off the mainboard (Figure 2 - 10).

3. Disconnect the modem cable from the modem module.

4. When replacing the standard MDC modem module with a Bluetooth modem combo module, see “Installing a

Bluetooth Modem” on page C - 2.

Figure 2 - 10

Modem Removal

Sequence

Remove the screws,

lift the modem off

the mainboard, and

disconnect the ca-

ble.

Note: Disregard the

two antenna cables

if the computer has

no wireless LAN

module. If the com-

puter has a wireless

LAN module, the

two antenna cables

should be connect-

ed to the wireless

LAN module - see

“Wireless LAN

Module Removal

Sequence” on

page 2 - 16.

1 2 3



3. Modem

•2 Screws