Service manual

Disassembly
2 - 8 Removing the Bay One Device
2.Disassembly
Removing the Bay One Device
1. Turn the computer OFF.
2. Place the computer on a clean, stable surface and turn it over.
3. Locate the release latch (Figure 2 - 2a) for the Bay One device.
4. Slide the release latch towards the unlock symbol and hold it in position.
5. With the release latch held in position, slide the device out slightly, then lift it up and out of the computer.
Figure 2 - 2
Bay One Device
Removal
Sequence
a. Slide the release
latch to the unlock
position and hold it
in position.
b. Partially slide the
device out partially.
c. Lift the device up
and out of the com-
puter.
1
1
a. b.
c.
2

2. Bay One Device