Technical data

HANDLING, PROGRAMMING
4
Windows in
screen
Create your own user interface that offers the most convenient
operation!
The reason for application of window structure is user inter-
face created in WINDOWS operation system. Each window
is an individual panel whether or not contains data input or
other control options. User can locate panels anywhere in the
screen in arbitrary disposition. Panels can be resized option-
ally. The screen composed by user can be saved or also
frozen. The frozen screen can not be modified (resize or close
panels).
Windows in
screen
Manual data input
The features of manual mode are important to manage the
user-friendly supply of CNC machine tools. The NCT 200
controls also excel in this subject. The control saves the issued
commands and lists them on the screen. By highlighting any
command line on the list, the commands can be issued
again.
Compatibility Lathe, mill, grinder, sheet metal cutter CNC
It is a great advantage if different type of machine tools can
use the same control and the operating and programming
system is compatible among them, and there are only tech-
nological differences. The NCT 200 series controls can be
installed in different machine tools, and only specific PLC pro-
grams and necessary technological macros need to be de-
veloped.
Efficiency, Com-
patibility
ISO programming = Efficiency, Compatibility
The programming and executing of programs in the NCT
200 controls is fully compatible with previous NCT 100 con-
trol series and with several Japanese and American CNC
controls. This is the easiest solution to connect CAM systems
to NCT 200 series. This is an efficient, fast programming lan-
guage, the worldwide alphabet of CNC techniques.
MACRO MACRO programming by defining symbolic variables
The popular MACRO programming used in NCT 100 con-
trols is also available in NCT 200 controls. The advantage
of the new Macro system is that the variables of the macro
program can also be referred to by symbols.
myNCT myNCT
However, the most efficient CNC program is still written in
G-codes, the program writing time, not the program execut-
ing time has to be reduced at single piece or short-run pro-
duction cases. The myNCT program editor helps in this
activity. The machining can be done and simulated graphi-
cally by drawing the contour of workpiece and filling some
dialogue charts in a few minutes. Of course you can do it
while executing another part program.
Mr. Pál Maklári, quality controller of NCT,
making the final inspection
Visitors of the Industria exhibition in Budapest