Technical data

DIAGNOSTICS

Logbook Creating Logs, sending log file

The inspection module of NCT inspects and records every

event and creates an event history!

The NCT 200 controls save each important event in a log

file. In case of any malfunction during the operation of the

unit, whether or not it was caused by error of servo system,

operator error, or error detected by PLC. This log file can

be sent to the NCT customer service center by email. Con-

trol will be an open book for NCT professionals by log life.

There is a tutorial video in Youtube to manage log files for

users (create an NCT 201 error log file).

Remote machine

Remote diagnostics can be performed by means of the “re-

mote machine service”. If the customer can provide a login

facility to the NCT control the NCT technicians can connect

to the user interface and manipulate the CNC control from a

remote PC, no matter where the machine is located.

Auto parameter

setting

The NCT asynchronous servo drives are often connected to

motors without known, tested parameter set. The “auto pa-

rameter setting” function integrated in our asynchronous servo

drives is used to install these motors. The user only has to enter

into the CNC control the original parameters found on the

motor data plate. The servo drive software analyses and com-

putes an optimal parameter set to achieve the best motor con-

trol. Of course the computed parameters will be refined,

saved and reloaded after adjustments.

Services to

help setting

servo axes

Diagnostic functions help error detection and tuning of servo

axes. The characteristics of commands issued by the path

generator, speed, position, tracking error (lag) of axes can

be displayed in the oscilloscope screen integrated in to the

control. By using circular test you can verify whether the set-

tings and the operation of servo system are correct, without

using external unit. Of course the features can be displayed

in numeric format and in a chart.

NCT booth on the Industria exhibition in Budapest

Mr. László Horváth Director of R&D department consulting

with customer at Industria exhibition