Service manual

Disassembly
Removing and Installing the Processor 2 - 11
2.Disassembly
Removing and Installing the Processor
Processor Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 8).
2. The CPU heat sink will be visible at point (Figure 7a) on the mainboard.
3. Remove screws
, , , , , (Figure 7b), the reverse order indicated on the label.
4. Carefully lift up the heat sink (Figure 7c) off the computer.
A
6
5
4
3
2
1
B
Figure 7
Processor Removal
a. Remove the cover and
Iocate the heat sink.
b. Remove the screws in
the order indicated.
c. Remove the heat sink.

B. Heat Sink
•6 Screws
a.
1
2
3
b.
c.
B
A
6
5
4