User guide

Disassembly
Removing the Hard Disk Drive 2 - 9
2.Disassembly
4. Remove the HDD bay cover (Figure 5c).
5. Grip the tab
and slide the hard disk assembly in the direction of arrow (Figure 5d).
6. Lift the hard disk assembly out of the bay (Figure 5e).
7. Remove the screws - and the hard disk cover from the hard disk
(Figure 5f).
8. Replace the HDD assembly by using a finger to push it in at point in the direction of arrow .
9. Reinsert the HDD bay cover by placing it on the bottom case assembly, and make sure the case markers line up
.
10. Apply downward pressure with both thumbs at points & and slide the cover in the direction of the arrows as
illustrated.
11. Replace the screws and battery
(see page 2 - 8).
3
5
6
7
8
9
10
11
12
13
14
15
16
c.
g.
3
5
8
14
d.
6
10
9
15
12
14
16
e.
f. h.
7
11
13

3. HDD Bay Cover
7. HDD Assembly
10. HDD Cover
11. HDD
•2 Screws
Figure 5
HDD Assembly
Removal (cont’d.)
c. Remove the HDD bay
cover.
d. Grip the tab and slide the
HDD assembly in the di-
rection of the arrow.
e. Lift the HDD assembly
out of the bay.
f. Remove the screws and
cover from HDD.
g. Reinstall HDD assem-
bly.
h. Replace the HDD bay
cover.