Service manual

Disassembly
2 - 10 Removing the Hard Disk Drive
2.Disassembly
Removing the 2.5" (63.5mm) HDD or SSD
1. Remove the battery (page 2 - 5) and rear top cover (page 2 - 7).
2. The hard disk is located at point
(Figure 7a).
3. Remove screws & from the bracket (make sure you use a small manual screwdriver and not an electrical
screwdriver to do this, due to the delicate nature of the screws).
4. Lift the HDD assembly out of the computer.
1
2
3
6
4
1
3
2
a.
4
b.
c.
Figure 6
2.5” HDD or SSD
Removal
a. Locate the hard disk
assembly
b. Remove the screws.
c. Lift the hard disk as-
sembly out of the
computer.

4. Hard Disk Assembly
•2 Screws