Service manual

Disassembly
2 - 6 Removing and Installing the Battery
2.Disassembly
Battery Installation Procedure
1. Insert the battery at an angle and slide it firmly into the battery bay until connected (Figure 2a).
2. Insert the battery bay cover by angling it to fit on the right at first, and then click the left side into place
(Figure 2b).
3. Slide the cover in the direction of the arrow until the top marker of the battery cover icon is aligned with the
marker on the side of the computer (Figure 2c).
4. Slide the latches towards the lock symbols to lock the cover in place (Figure 2c).

1. Battery
2. Battery Bay Cover
6
1
6
2
3
4
5
6
7
8
Figure 2
Battery Installation
a. Insert the battery.
b. Insert the battery bay
cover.
c. Slide the latches towards
the lock symbols.
3
1
4
1
7
2
a. b.
c.
8
5
6
7
6
8