User`s manual

Chapter 3: BIOS Utilities 2-27
Installing Memory Module
Follow the steps below to install the memory module:
1.
Turn the system power off.
2.
Press the two keyboard latches to elevate the keyboard from its
normal position (Figure 2-3).
3.
Carefully lift the keyboard assembly out to expose the mainboard.
Locate the memory sockets (Figure 2-5).
4.
Insert the memory module at a slight angle (45) and fit its
connectors into the socket firmly.
5.
Press two edges of the memory module (as the arrows indicated)
to make it locked into place (Figure 2-6).
6.
Reinstall the keyboard assembly.
Note:
Make sure you install the memory module in the order of Bank 0, Bank
1, Bank 2 (see Figure 2-5). Please refer to the table of DRAM
combinations or consult your dealer for a proper installation.
Figure 2-6