User`s manual

Step 6: Installing Video-in Driver
#
Boot the system, press Ctrl + Alt + S to enter SCU system.
#
Select “Components”.
#
Enable “Video In Mode”.
#
Under Windows 95, double click “Start”.
#
Select “Run”.
#
Open the path “D:\video-in\setup.exe.
#
Run “setup.exe” to finish the installation.
Step 7: Installing ATI DVD Play Driver (Option)
Note:
Make sure that you have already successfully installed the VGA Driver,
Audio Driver and DirectX5 or DirectX6 beforehand.
#
Boot the system; press Ctrl+Alt+S keys to enter SCU. Select [Power]
menu. Enable [Low Power Saving], or select [Advance CPU control] to
set [Full Speed]. (If the clock speed of the Intel Pentium II is above
366MHz/400MHz or if your DVD runs smoothly, you can skip this
step).
#
From the Windows 95/98 taskbar, click [Start] button; select [Settings],
[Control Panel], and then click [System]. Click the tap [Device
Manager]; select [CDROM], and click the item including the type of
[DVD-ROM], Click the tap [Setting]; and then enable [DMA] check box.
#
Insert the CD of ATI DVD Play application and the program will
automatically run the installation until finished. Otherwise, click [Start]
button from the Windows 95/98 taskbar. Select [Run]. Type
[D:\Atiplay\setup.exe] and click OK to finish the installation.
Step 8: Using Infrared Wireless Communication
#
Please refer to the readme file under the FIR directory.