Service manual

85
Power Menu
Clicking an option will enable the specific capability.
Item Setting Function
Power Management Power saving mode Disabled Disables the system’s
power saving features.
Battery only Enables the system’s
power saving features only
during battery operation.
Always on Enables the system’s
power saving features
during either battery or AC
operation.
Power saving level Low power saving Enables the power saving
to its lowest which results in
maximum performance but
shortest battery life.
Medium power saving Enables the power saving
to its medium which results
in moderate performance
and battery life.
High power saving Enables the power saving
to its highest which results
in minimum performance
but longest battery life.
Video Monitoring Video RAM access will
prevent the system from
entering a standby mode.
Suspend Controls Battery weak Flash beeping The warning icon flashes
on the LCD bar and emits a
series of the audio beeps.
Suspend system Automatically suspends the
system upon a low battery
condition.
Flash only The warning icon flashes
on the LCD bar.
Suspend mode Suspend to memory Specifies the suspend
mode as 5-volt suspend
mode.
Suspend to disk Specifies the suspend
mode as 0-volt suspend
mode.
Modem ring resume Resumes the system from
suspend-to-memory mode
when a modem ring is
detected from the serial
port where the modem is
connected.
Set resume alarm Resume hour Resume
minute
Sets the time to resume the
system from suspend-to-
memory mode.