Service manual

85
Devices Menu
Clicking an option will enable the specific capability.
Item Setting Function
Diskette Drive None Specifies a drive type
1.44MB for diskette drive A.
Hard Disk Disk Type None No hard disk is installed in the
system.
Custom Modifies the values for cylinders,
heads, sectors per track, landing
zone, write precomposition and
size (MB).
Auto-ID Automatically configures the
hard disk parameters for any
supported IDE drive.
Enhanced Options LBA mode Enables Logical Block Address
(LBA) mode to overcome 528MB
barrier.
Multiple sector
mode
Enables multiple sector mode to
increase sequential data
transfers.
Fast PIO mode Enables Fast Programmed
Input/output (PIO) mode for high
data transfer rate.
COM Ports COM A settings None Specifies the COM A
3F8H, IRQ4 configuration.
2F8H, IRQ3
3E8H, IRQ4
2E8H, IRQ3
COM B settings None Specifies the COM B
3F8H, IRQ4 configuration.
2F8H, IRQ3
3E8H, IRQ4
2E8H, IRQ3
COM B definition Serial port 2 Defines COM B
IrDA (HPSIR) hardware.
IR (ASKIR)
LPT Port Port setting None Specifies the LPT
378H port configuration.
278H
3BCH
Port definition SPP mode Standard Parallel Port.
EPP mode Enhanced Parallel Port.
ECP mode Extended Capabilities Port.
IRQ setting IRQ5 Specifies IRQ
IRQ7 configuration.
ECP DMA setting DMA1 Specifies ECP DMA
DMA3 configuration.