User`s manual
Chapter 4—Troubleshooting 4-2
Battery
Problem: The battery pack can not be charged.
Solution 1
: The battery pack is exposed to excessively hot and cold
environment. Let it restore to normal condition before you use it.
Solution 2
: The power might be used up.
Problem: The battery pack can not be charged and the charge
indicator turns off.
Solution 1 :
The battery has been fully charged.
Solution 2
: The
battery pack is exposed to excessively hot or cold
environment. Let it restore to normal condition before you use it.
Solution 3
: The battery pack is used up.
Problem: The beep sound is heard and the low-battery indicator
turns on.
Solution
:
The computer is in low-battery s tatus. Please connect your computer with AC
adapter, or press Fn + Esc key combination to enter suspend mode.
Problem: The beep sound isn’t heard whereas the low-battery
indicator turns on, or the gauge indicates power is less than
10%.
Solution
: The computer is in low battery s tatus. Please adjust the volume control and
connect the computer with AC adapter.
Problem: The actual battery operation time is shorter than expected.
Solution 1
: The battery is exposed to excessively high or low temperature. The ideal
temperature for battery operation is between 50
°
F and 95
°
F (10
°
C and 35
°
C)
whereas keeping is between 32
°
F and 113
°
F (0
°
C and 45
°
C).
Solution 2
: The battery has released some power. Please recharge it.
Solution 3
: The power management has been turned off.
Solution 4
: Some peripheral device or PC card is consuming power. Turn
off the unused device to save power.
Solution 5
: The battery has been given a partial charge. When charging,
always fully charge after fully discharge.
Problem: When the battery is being charged and the temperature is
over the degree 60
, the LED indicators will show
blinking green.
Solution
1
: Take the battery out for a while. After the heat cooling down,
recharge the battery again.
Solution
2
: Turn off the DeskNote. When the computer cools down, turn
on the DeskNote computer again to recharge the battery.
Power
Problem
:
The computer can not boot when the battery pack is not
inserted.
Solution 1
: The power cord is not correctly connected with AC adapter.
Make sure the power cord is firmly plugged into grounded
outlet and computer.
Solution 2
: The grounded outlet is not in normal operation. Check the
outlet’s function or use other outlet.